Questions And Answers

# List All Questions Search List by Category
Question Where can I find documentation on the appropriate use of the
EIA RS-471 symbol (symbol for electrostatic sensitive devices)? Given an
ESD in a metallized bag in a cardboard box, is it acceptable to place the
symbol on the box and not the bag?
Answer Yes, it is acceptable to place the symbol on the box and not the bag, see the application section below. The RS-471 symbol is the same as the ANSI/EOS/ESD-S8.1ESD susceptibility symbol.

ESD Susceptibility symbol
The ESD susceptibility symbol incorporates a reaching hand in a triangle with a slash through it and is used to indicate that an electrical or electronic device or assembly is susceptible to damage from an ESD event.

Application
The ESD susceptibility symbol should be used on assemblies and devices that have a sensitivity to ESD events. The symbol shall not be used on materials designed for use in ESD protective areas, such as smocks, seating, worksurface materials, tools and equipment, packaging materials, or personnel grounding equipment. The symbol may be incorporated on a sticker used to close or seal ESD protective packaging to indicate that materials inside the package are ESD susceptible. 

Format
The symbol is a reaching hand with defined fingers and fingernail, in a contrasting triangle with a slash in front of the hand.
Related Categories:
 
If you have found this Q/A useful, please rate it based on its helpfulness.
Rating Rating Rating Rating Rating
This question has been rated: 100%100%100%100%100%100%
(100% at 2 Ratings)