• Provides physical protection with conductive material
• Ships flat, save on freight costs
• Easy assembly
• Rtt: Conductive material (1 x 10² to < 1 x 10⁵ ohm); provides reliable path-to-ground
• Meets ANSI/ESD S20.20 worksurface required limit per ANSI/ESD S4.1 and ESD TR53
• Made from extruded high impact polypropylene materials
• Durable, reusable, will not lose shielding and static charge decay properties
• Chemical and moisture resistant
• Includes wire frame for extra strength
• Made in the United States of America

Options Available:

• Conductive Plastic Handles available
• Static Dissipative Foam for bottom, providing ESD and shock protection
• Document Holders
• Lid

Per Packaging standard ANSI/ESD S541 section 6.1 Inside an ESD Protected Area “Packaging used within an EPA (that satisfies the minimum requirements of ANSI/ESD S20.20) shall be: 1. Low charge generation.2. Dissipative or conductive materials for intimate contact”